USG SLE-801CDK

Types of probes:
- Linear, Convex, Microconvex Arrays;

Frequency ranges:
- from 3.5 to 10.0 (MHz) ;

Scan modes:
- B, B+B, M, B+M, D, B+D, B+CFM, B+CFM+D, B+PD, B+PD+D;

B-mode:
- Depth selection – from 40 to 210 mm;
- Frame rate – up to 50 frame/sec;
- TGC control – 8 zones;
- Invert options - up / down, left / rigt;

M-mode:
- Adjustable sweep rate – 4 rates;

B+M-mode:
- Simultaneous B-imaging and M-mode for all probes;

D-mode:
- Depth selection: from 5 to 200 mm;
- PW 3.5 and 7.5 MHz;
- Duplex and auto-update image;
- HPRF: up to 30 kHz;
- Digital audio signal processing;
- Adjustable sweep rate - 4 rates;
- Wall filter: 50-800 Hz;

CFM / PD-mode:
- Depth selection: from 2 to 210 mm;
- Volume velocity of blood flow up to 60 cm/sec;
- Wall filter 50-400 Hz;
- Gamma-correction - 4 rates;
- TRIPLEX;

Image processing:
- Edge enchancement;
- Post processing curve – 7 types selectable;
- Adjustable averaging and compression;
- Real time index calculation;

Image memory unit:
- Storing at HDD as BMP image;
- cineloop - 256 frame
- Measurement and calculation capability;
- Doppler cine memory with sound tracking;

Probe Connector:
- Simultaneous connection of two probes , selection via the keyboard;

Measurements:
- B-mode: 4 Distances, 2 Areas/Circumferences, 4 Volumes, 2Angle;
- M-mode: 4 Heart Rates,4 Time intervals, 4 slope rates, etc ;
- D-mode: blood flow parameters ( Vmax, Vmin, Vvav );
- CFM-mode: Volume blood velocity;
Calculations: - Complee biometry packages dedicated to Abdominal, Ob/Gyn,
Cardiology

Up-to-date software:
- The software runs under Windows XP that enables to use all
the possibilities provided by this operational system :
- Information reference when working in any mode;
- Easy-to-use and comprehensible user interface;
- Data protection and fail-safety of the system;
- Built-in Internet-exchange and network means;

Ext. Interface:
USB;

Power Supply:
( 100 - 240 )V, ( 50 - 60 )Hz;
Monitor: -15-inch Flat LCD;

Dimensions:
850 x 1200 x 600 (mm) ( without monitor );

Net Weight:
up to 50 kg ( without probes, monitor );

Optional:
3D-mode;
Videoprinter;
Foot switch;